125hp Kohler Engine Command John Deere Stx38 Cv125s 1215 Used 1

9 knm torque, max 125hp kohler engine speed 220 rpm, Mc double clamps 279mm, 20L oiler Price: 95,000 (Euros) CASAGRANDE C6XP MICROPILE RIG (Ref#14432TG) Manufactured 2012, approx. 5′ height for transport) Price: $495,000 BAUER BG-11 (Ref#2498T) 3 units available, all units have 125hp kohler engine new painted, clearned and serviced, Located Asia. Tracks contract to 35″, ideal for seismic 125hp kohler engine retrofits, foundation repair, dam rehab and ground consolidation. 2m diameter, 52,000# overall weight, 12,550m height (42′), drills daily, located in Mexico Price: $80,000 SOILMEC A39 (Ref#10169Tc) Manufactured 1993, mounted on tandem 125hp kohler engine axle truck, 34m dril depth, 1.

, 125hp kohler engine Feed stroke 1. 5 line pull, 860 daNm torque, 0-140 RMS, 210KN 125hp kohler engine clamp force, Hatz 4L41C diesel engine. 3 (300 hp) diesel deck engine, Rexforth hydraulic pumps, 1000mm diameter, 22m drill 125hp kohler engine depth, with extension to drill to 27. 8700 hours 125hp kohler engine (Jan 2015), BK200 368 3 27 kelly bar Price: $325,000 BAUER BG14 DRILLING PACKAGE (Ref#2213Na) Manufactured 1988, mounted on O&K GT20 undercarriage, 68 ton operating weight, 140 kNm rotary torque (103,000 foot pounds), KDK 140 rotary head, Deutz BF10L513 (276hp) engine, 150 kN main winch pulling force, 75 kN aux winch pulling force, free fall, cylinder pull down system (150 kN push 200 kN pull), mechanical and hydraulic connections for casing oscillator, fixed undercarriage. 5m x 5 125hp kohler engine section friction Kelly bar, located Asia Price: $145,000 SOILMEC R516 (Ref#775N44) Manufactured 2001, Cummins 6 CTAA diesel engine 220 kW at 2300 rpm, width with retracted tracks 2500mm, width with extended tracks 3900mm, rotary head: max torque 154 kNm, interlocking 4 x 13. 28,000# overall weight Price: $55,000 CASAGRANDE C6 (Ref#14432Tf) Manufactured 2003, approx. 7KW Mase (20 hours) Grill, Cockpit with Bracket (New Macerator Discharge Pump w Y-Valve Microwave Oven Nav Pkg with Radar, Garmin 5212 w 4KW Radar Dome, GPS Antenna, 125hp kohler engine Depth Fish Finder Safety Kit (Fenders, Life Jackets, Lines) Shade, Entry Door Rollup (Custom) Upholstery John Deere 643 6 (Ultrahide Dinette matches Helm Seat) Windshield Cover (Custom) Standard Features include: Cabin Heater Swim Step, Fiberglass, 4-Rung Ladder. , Mast length 3. Deck engine overhauled in 2012, new KDK rotary head Also includes: (2) Kelly bars (24m & 27m) John Deere 6059t Cylinder – BK14 343 3 27 – BK14 343 3 24 (1) BV 1502 casing oscillator Price for all: Reduced: 300,000 EUR BAUER BG11H (Ref#12664T) Year 2015, low hours, KDK 110 rotary head, 305 4 30m Kelly bar, 125hp kohler engine sectional mast for low headroom applications, masts folds to rigging position for easy transport (only 11. Price: $165,000 for unit only (without excavator) Also available: 2008 Volvo EC240CL excavator Price for both: $215,000 REV-DRILL 30 40DD DRILL ATTACHMENT (Ref#12900T) Manufactured 2014, no kelly bar, unmounted without 125hp kohler engine excavator, very low usage and in excellent condition Price: $200,000 REV-DRILL 55 30HD (Ref#12656R) Manufactured 2011, less than 500 hours, 14,000# torque, 14,000# crowd (double gear case), (2) piece mast for tieback applications, 54′ stroke, 120′ of 4-1 2″ drill rod, integrated water air pipe and hoses, swivel, discharge s wivel casing driver, hammer and bit. 28,000#, 25,000# torque, mounted on Hitachi 2X70LC base Price: $170,000 TESCAR CF3 CFA (Ref#9850Tg) Year 2007, 5000 hours, set up for CFA drilling, mounted on Hitachi ZX70 excavator with 40 kw 53 hp diesel engine, approx. 3-C diesel engine, 76 ton overall weight, base carrier Hyundai R205LC-7, located Asia Price: $285,000 BAUER BG22 (Ref#9404T) Year 2000, mounted on Liebherr R942TR base 125hp kohler engine Price: 210,000 Euros BAUER BG20H (Ref#1951N) Manufactured 2010, approx. 35′ mast height in drilling position Price: 125hp kohler engine $120,000 TESCAR CF3 (Ref#2833TB) Year 2011, 29′ clearance in standard drilling mode, 19. 4000 hours, Deutz TLD 2012-L04-2V-95kw diesel engine, 6700mm 125hp kohler engine mast stroke (good to use 20′ pipe), 8700mm overall mast length, T20 EP rotary head with 15. 7500 hours, 100+ drill depth, 59,000# torque, Cat diesel engine, 20,000# main winch, 30 ton overall weight, 125hp kohler engine mounted on Cat 315C base Price: $180,000 IMT AF-80 TRUCK MOUNT (Ref#12044R) Year 2002, Cat 315B power module with Cat 3054 engine, 60,000# torque, 22,500# crowd, 20,000# winch, (3) 24m locking kelly bar (78′ depth), mounted oon TOR Dr 8690 carrier with Cat C10 (335 hp , 10 speed transmission, 8x 6 wheel drive, located USA Price: $270,000 IMT AF10 (Ref#775Nzz) Manufactured 1996, mounted on CAT 320B, new engine, slew ring and pump in Jan 2010, original owner for 15 years, very well maintained, 10,200 KGM torque, 14,000 kg push, 15,000 kg pull, Genuine John Deere Oem Fuel 14,000 kg main winch, 7,500 kg aux. If you register as a seller you will enjoy an easy four step posting process to post a deal. 4,000 1 Ct G Vs1 hours, remote control, 2 rod carousel, casing extractor on upper clamps Price 195,000EUR COMACCHIO MC1200 (Ref#4604T) Manufactured 2005, CT62A head, 125hp kohler engine double clamp with extractor, 20′ stroke, 22 ton, 2 remotes, aux wash pump Price: $182,500 COMACCHIO MCF04. For vertical short auger applications: 34′ stroke, kelly br, standard mount Price: $195,000 SANY SR220 (Ref#10248Tb) Manufactured 2005, Cat base, 60m drill depth, 2000mm diameter, located Asia Price: $185,000 SOILMEC R930 (Ref#15085T) Manufactured 2000, 200,000# torque, self erecting mast, comes with 2 locking kelly bars (4 x 10m and 4 x 13m), track mounted, 225,000# overall weight, has drilled recently and in good condition, located USA PRICE REDUCED: $255,000 SOILMEC SR80 (Ref#5152Rb) Manufactured 2009, 125hp kohler engine CFA kit and kelly bar, free fall aux winch ($60,000 option) Price: $495,000 SOILMEC SR70 CFA RIG (Ref#10169Ta) Manufactured 2012, approx. Price: $105,000 HUGHES WILLIAMS MF60 (Ref#6298T) Early 1960’s, 471 Detroit deck engine, mounted on 1996 Ford L9000 truckw ith Cat 475hp engine, some cyinders need repacking but currently running Price on Request HUGHES WILLIAMS MF60 (Ref#1845R) Manufactured 1962, chain drive, double kelly bar (60′ depth), 3-1 2″ inner bar, 471 Detroit diesel deck engine (1,500 125hp kohler engine hours since rebuild), mounted on 1984 International truck PRICE REDUCED: $24,500 HUGHES WILLIAMS LDH60 (Ref#15108Ta) Manufactured 1968, 471 GM diesel engine, mechanical brakes and controls, DG rotary, 60′ digging depth with two bars, no service winch, mounted on Hendrickson carrier, 671 GM diesel engine, RTO 11613 Fuller transmission Price: $20,000 HUGHES LDH60T (Ref#7567Tb) 1974, 4. 7 deck engine, 4 x 9m interlocking kelly bar, 95,000# torque, 80,000# operating weight, 44,000# crowd, located USA Price: $450,000 SOILMEC SR30 (Ref#14495Ta) Manufactured 2011, approx. 3L diesel deck engine (replaced new 2006), Allison CRT3531-3 transmission (rebuilt July 2011) PRICE: 385,000 WATSON 2500 125hp kohler engine (Ref#8666Rc) Manufactured 2000, 120′ drill Titan John Deere Tractor 49 Hd Hay depth (8″ outer, 6″ floater, 4. Price: $35,000 TEXOMA 600 (Ref#11691T) 3 units, manufactured early 1980’s, John Deere diesel deck 125hp kohler engine engine, 35′ depth, mounted on International trucks Priced From $37,500 (needs work on ring gear) to $60,000 TEXOMA 600 (Ref#14105R) Manufactured 1984, track mounted, wet kelly bar, 30′ depth, Cummins 5. (2) AlphaWire (1) Alstom (3) Amphenol Industrial Solar Technologies (1) 125hp kohler engine APE Belliss India Ltd. 2m max diameter, located Mexico Price: 265,000 Euros SOILMEC R10C (Ref#775N107) Manufactured 1990, 1 long kelly bar, 1 short kelly bar, mounted on Cat 225 base, Cat diesel engine, 38m max depth, 125hp kohler engine 1500mm max diameter, 1300mm max dia with casing, 100,000 kNm max torque, currently drilling and well maintained Price: 120,000 (Euros) SOILMEC R6 (Ref#7151T) Manufactured 1985, GM 4 53 diesel deck engine, 30m drill depth, 6. 5m friction Kelly available at extra cost MAIT HR100 (Ref#775N134) Manufactured 2008, 10,500 daNm 77,000# rotary torque, Cat 160 HP diesel engine, 22,500# main winch, 68,000# overall weight, interlocking kelly bar, 32m drill depth Price: 180,000 (Euros) MAIT MIDI HR30 DRILL (Ref#15147T) Manufactured 2014, very low hours, mounted on Komatsu PC80 rubber track base with diesel engine, 25,000# torque, 28,000# overall weight, 6 section kelly bar for 70′ drill depth, Kelly Ar67417 Spindle For John Deere Tractor 1020 bar locks, rebuilt on outer bar, approx.

500 kg, Max 125hp kohler engine push down force 1. 3500 hours, 2m mast extension, Cat 563kw 750 hp, 42 ton winch, 72m Kelly bar Price: 1,650,000 Euros BAUER BG40 CRAWLER DRILL (Ref#6520T) 125hp kohler engine Manufacted 2008, 313,330# operating weight, 581 hp Tier III Cat C15 engine, mounted on BS100 base carrier, WV130 undercarraige, 11. 1500 hours), Cat 125hp kohler engine C15 engine, kelly bar type BK28 419 3 036, oscillator attachment for BV2000, upgrade to undercarriage UW110, pre-equipped with casing drive adapter, rotary drive KDK275 S (multi-geared), located USA Price: $1,100,000 like new condition BAUER BG25C (Ref#14117Th) Year 2006, Cummins C8. Click on the description to go right to the boat that interests you, or scroll down. Recent repairs: all hydraulic hoses were replaced about 3 years ago, new sprockets on most of the 125hp kohler engine digging chains, new hydraulic valve bank, new bearings and good used ring and pinion set just put in F8 rotary pot never used, new 5 speed manual stransmission in carrier Price: $47,500 HUGHES WILLIAMS 440 (Ref#11003Ta) 1500 hours, HT 750 DRD transmission, 12. 3 diesel engine Price: $300,000 TEXOMA 800-95 (Ref#10256T) Manufactured 2013, John Deere diesel deck engine, 95′ drill depth, 75,000# torque, mounted on 2014 Freightliner Coronado tri-drive 125hp kohler engine Price: $385,000 TEXOMA 800 (Ref#2120T) Manufactured 2006, John Deere diesel deck engine, mounted on 2006 International with factory reman. 5m interlocking bar, 60m drill depth, located Asia Price: $185,000 IMT 120 (Ref#3679R) freshly rebuilt, excellent condition Price: $415,000 IMT AF-80 (Ref#4208T) Manufactured 125hp kohler engine 2004, approx. 4800 hours Price: $275,000 USD SOILMEC 125hp kohler engine SM401 MICROPILE RIG (Ref#775N137) Manufactured 2006, approx. 5000 hours, 18,000# 125hp kohler engine overall weight, 15m kelly bar, mounted on Bobcat, ideal for low clearance or limited access locations Price: $130,000 USD TESCAR CF6 (Ref#2833TA) Year 2008, mounted on Hitachi base with Isuzu dieel engine, 15,000# winch, 44,000# torque, 47,000# overall weight, approx. 25″ outer kelly bar), Cummins engine, main winch, kelly winch, recently serviced PRICE REDUCED TO: $165,000 TEXOMA 700T (Ref#10044RA) Manufactured 1984, track mounted with Detroit 4V53 engine, 125hp kohler engine 1074 hours, 60′ digging depth Price: $145,000 TEXOMA 700 (Ref#12905RA) Manufactured 1983, mounted on 2005 Freightliner tandem axle truck approx. Winch Price: 125hp kohler engine 150,000 EUR IMT FR-1200HD (Ref#11719R) 2 units available, manufactured 2002, Cat 3126B engine, 11,000# torque, 254mm double clamps Price: $120,000 INTEROC 109B (Ref#3443N) Manufactured 1997, track mounted micropiling rig, 6436 hours, 27,000 lb. 8000 hours, 5. To register as a buyer or as a seller 125hp kohler engine , it takes about 2 minutes. 5A (Ref#10240T) Year 2005, 18,500# torque, max height 19′ (can be shorted to approx. 4000 125hp kohler engine hours, Volvo TAD 650VE diesel engine, max torque 100 knm, 4 x 7m interlocking kelly bar, located South America Price: $350,000 CASAGRANDE C14 MICROPILE RIG (Ref#14487T) Year 2011, 16m stroke mast (can set 50′ casing), recently rebuilt Deutz diesel engine, upgrades M6 clamps (500mm dia), upgrades T5000 rotary head (biggest rotary in the market for micropile rig), 3″ King swivel, jib boom, Bellin water pump, reinforced mast and chain, 31,000 kg overall weight Price: $265,000 CASAGRANDE M9-1 (Ref#4603T) Manufactured 2003, TI600 head, crane, winch, off slide, C7 mast, 40kip pullback, aux hyd, jet timer, 20′ stroke, 23 ton, 198 hp, loaded Price: $147,000 CASAGRANDE M9-1 (Ref#3556Rb) Manufactured 2002, with Euchill 5080 drifter rotary head, mini crane, runs 10′ pipe, 10″ (254mm) double clamp, new paint Price: $115,000 CASAGRANDE C8 MICROPILE (Ref#14436T) Year 2008, 10m long stroke mast Price: $150,000 CASAGRANDE C8 MICROPILE RIG (Ref#7020Ta) Year 2005, 10m mast (32. , Deutz BF6L913 engine, Krupp HB40A rotary head, 9700Nm torque, 15′ mast stroke Price: $165,000 J&M (APE) 125hp kohler engine none available at this time JUNTTAN PM23LC (Ref#10967Ta) Manufactured 2008, crawler mounted, 9950 hours, Cummins QSB 6. And Fenders Sport Storage Rack Spotlight, 6″ w Dash Control Stove, Single Burner Electric Alcohol Thrusters, Bow and Stern Washdown System (Raw Water) Windlass, SS 12V 125hp kohler engine Helm and Bow Price Includes: 8. 4500 hours, track mounted, 60′ depth (4″ inner bar, 125hp kohler engine 4″ inner 5. 5′ clearance in low profile mode, 20m Kelly ar that fits both configurations, operating weight approx. Price: $80,000 TEI WD50 ELECTRIC FOUNDATION DRILL (Ref#9899Rb) Hydraulic drive using 20 hp electric motor (240 480), auger and hammer drilling, 3500 ft lbs lift and 125hp kohler engine pulldown, suitable for auger and hammer drilling, 1500 ft lb torque, mountedon 3 wheel rame PRICE REDUCED: $27,500 TEI WD50 ELECTRIC FOUNDATION DRILL (Ref#14462T) Manufactured 2004, approx. 500 mm, Max extraction force 110 kN, Max push down force 110 kN, Double Clamps 90-350 mm, Operating John Deere 850c weight 29,000 kg PRICE: 150,000EUR CZM EZ250 (Ref#10613Rb) Manufactured 2014, less than 500 hours (Jan 2015), 48m depth with locking bar, 75m depth with friction bar, 235,000# torque, 70,000# pulldown, 80,000# pull up Price: $1,300,000 CZM EZ250 (Ref#6072Ta) 125hp kohler engine Year 2014, POR COMACCHIO MC1200 (775N62), manufactured 2010, 9m extended mast and stroke, approx. 3 125hp kohler engine diesel engine, 13. 9 deck engine, 350 hours on rig, 4-1 2″ kelly reduced with 125hp kohler engine adaptor to 3″, 50 gallon fuel tank, 240 degree turntable Price: $85,000 TESCAR CR2. 35,000 125hp kohler engine miles, approx. Cummins engine, 90′ kelly with 4 ” inner bar, excellent condition Price: $395,000 TEXOMA 800 (Ref#10354T) Manufactured 2005, Cumins diesel engine, 90′ drill depth, mounted on 2005 Inrternational truck Price: $295,000 TEXOMA 800 (Ref#11917T) Manufactured 2003, John Deere diesel eck engine, m0unted on 2009 Peterbilt with diesel engine, 96′ depth capacity Price $410,000 TEXOMA 800 (Ref#11916T) Manufactured 2001, John Deere diesel deck engine, mounted on 2001 Kenworth truck with diesel engine, 95′ depth capacity 125hp kohler engine Price $410,000 TEXOMA 700 (Ref#10613Ra) Manufactured 1997, approx. The cockpit is 25% larger than the original R-25 giving it nearly 50 square 125hp kohler engine feet of aft deck space. 5m Kelly bar, main winch 170 kN, aux winch 75 kN, pulldown max extraction force 165 kN, max crowd 60 122 kN, str9oke 5100mm, operating weight 50-55000 kg Price: 225,000 (Euros) SOILMEC 516 (Ref#10503T) Manufactured 2000, 120′ drill depth (4-section 125hp kohler engine interlocking Kelly bar), 120,000# John Deere Oem torque, Cat diesel deck engine (approx. (1) Appleton Electric Company (1) AREVA (1) Ariadna (1) Artus (1) ATI (1) Atlas Copco (1) Baldor (1) biagio turbos (1) Bos-Hatten (1) Cameron (1) Canadian Solar (1) Kfi Wide 4500 Lb Stealth Winch & Caterpillar (21) Centrosol (1) Ciena (1) Coleman (1) Crystal Lightning (1) Cummins (9) Daihatsu (2) Danfoss (2) Deutz (1) Dresser Rand (1) Eaton (1) Elcos (1) Elemax (1) EMD (1) Enphase Energy (1) Four Star Industries (1) Friedrich 125hp kohler engine Schwingtechnik (1) GE (2) Geartek (1) Generac (2) General Electric (11) General Motors (2) HP (1) Huali (1) Humbolt (1) HY Industrial (Asia) Ltd (1) Hyundai (2) IEO Transformatoren (1) IHI Corporation (1) J. (1) JA Solar (1) Jinko (1) 125hp kohler engine Jyoti (1) Kaco (1) Kiswire Ltd (1) Kohler (4) Laurence Scott (1) Leroy Somer (4) Leroy Somers (1) Long Industries, Inc. 8500 original hours (as of Aug 2018), 3 x 9m interlocking Kelly bar, 109,000# overall weight, (bigger undercarriage and more torque than the B125 Series) Price: $145,000 CASAGRANDE B125 (Ref#775N139) Manufactured 2009, Cummins diesel deck engine (installed new in 2013), extra long crowd Piston, 5 x 7. 2005 Ranger Tugs R21 Classic w Trailer $27,500 Please call 125hp kohler engine to confirm current pricing Comes equipped with the following options: YANMAR Diesel 20HP (391. 7 diesel engine Tier 4 engine, 161,000 knm 118,000# rotary torque Price 525,000 Euros SOILMEC SR60 (Ref#2579Tb) Year 2010, 4 x 12m interlocking Kelly bar, located Asia Price: $375,000 USD SOILMEC SR50 (Ref#10035Tb) Year 2014, located Mexico Price: 485,000 Euros SOILMEC SR40 (Ref#2579Ta) Year 2010, located 60 Sd Low Asia 125hp kohler engine Price: $250,000 USD SOILMEC SR30 (Ref#775N143) Year 2017, 4 x 10. 8′), 8m (26′) stroke, Deutz BF6L914C (164 hp) diesel engine, M5 double clamps (406mm 16″), A2 service winch (20 KN line pull), T2500 rotary head (10 knm torque) Price: $105,000 CASAGRANDE C8 WITH JET GROUTING KIT (Ref#775N120) Manufactured 1999, pprox. 7Hrs) Anchor Package, Upgraded, w two anchors, Ultra SS Anchor (1) Cockpit Extras (Boat Hook, Binoculars, Shore Power Cord) Cooktop, Electric Alcohol Custom Cockpit Seating Custom Mahogany Dashboard Customized Storage 125hp kohler engine in V-Berth Head (enclosed with marine toilet, holding tank & deck pump-out) HDX Radar Refrigerator Freezer (Galley) Microwave Oven Navigation Package (Garmin 7610, GPS, Depth Fish Finder) Rod Holders Safety Kit (Fenders, Fire Extinguishers, Lines, Life Sling, Flares) Sky Screens (6) Sport Rack Swim Platform w Ladder & built-in Fenders & Rails Thruster, Bow Trim Tabs TV Antenna Windlass, Bow & Helm Controls Price Includes Gently-Used Aluminum Double-Axle Trailer 2014 Ranger Tugs R-25SC $118,900 Please call to confirm current pricing Designed to provide maximum comfort and versatility in an easy-to-own, easy-to-operate trailerable mini-yacht, the R-25SC offers a full 8 foot beam for roomy on-deck areas and larger interior spaces. Rig is designed 125hp kohler engine for dtown the hole drilling applications. 9 diesel deck engine, 13,500 Genuine John Deere Oem Belt kb 30,000# overall weight, 4000mm 13′ stroke, 25 kn 125hp kohler engine winch, 315mm 12. 4500 hours as of 125hp kohler engine Jan 2015, Delmag rotary head type BT 625-2, 610 S D with drill centralizer, mounted on Cat 330D, Cat C9 engine, located USA Price: $850,000 EGT MD5000 (Ref#3740R) Manufactured 2001, pprox. 2000 hours, track mounted with Deutz diesel engine, 18′ mast, water pump, good condition PRICE REDUCED: $100,000 HUTTE HBR504 MICROPILE RIG (Ref#775N126) Year 2003, dual rotary head, just rebuilt engine and pump Price: 85,000 Euros 125hp kohler engine IMT AF-280 (Ref#8930Rb) Manufactured 2005, pprox. 9knm torque), 14,275# extraction force, 7,870# crowd force, upgraded M5 405mm (16″) double clamps, Ferari upgraded 2 knuckle mini crane (ideal for handling casing) 3000mm (9’10”) long 125hp kohler engine tracks with 400mm (16″) wide shoes, hydraulic track stabilizer, control panel, toolbox, A2 hydraulic winch proving 20kn (4500#) max line pull, approx. 4000 hours, KDK, 178D rotary, mounted on BT50 carrier, Kelly bar type 20 368 3 27, Cat C7 engine, location USA Price: $725,000 BAUER BG18H (Ref#10613Rc) Manufactured 125hp kohler engine 2001, pprox. 4″ double 125hp kohler engine clamps, 1500 dnm rotary head torque Price 85,000 Euros SOILMEC SM400 MICROPILE RIG (Ref#15299Tc) Manufactured 1999, pprox. 5m diameter, located Mexico Price: 125hp kohler engine 225,000 Euros SOILMEC A39 (Ref#522T) Kelly bar, mounted on tandem axle truck with out and down outriggers Price: 75,000 Euros SOILMEC SM18 MICROPILE RIG (Ref#12382R) Manufactured 2011, low hours, max stroke of 31′ when using 17′ mast extension, also comes with ann 8’6″ extension, HT3700 rotary head with 27,000# torque, 15″ max clamp diameter, Moyno 3L8 pump Price: $375,000 SOILMEC SM14 MICROPILE RIG (Ref#14495Tb) Manufactured 2015, approx. There is an enclosed head with shower, sink, marine toilet, and a helm with full 125hp kohler engine instrumentation and navigation package. 9000 hours, recently reconditioned, Deutz BF6L913 (136 hp) diesel engine, 2500mm width undercarriage, 500mm track pads, T1600 rotary head (2,400 kgm torque), mast 10m length with rotary head stroke of 8m (can use 25′ pipe), M4 + M4S 305mm double clamps, 360 degree turntable, 22 ton weight for transport. 75,000# torque, PRICE REDUCED: $75,000 WATSON 1100 (Ref#14952T) Manufactured 2007, deck engine, mounted on 2007 Mack truck with diesel engine Price: $315,000 WATSON 1100 (Ref#11236R) Manufactured 2008, 35′ Kelly bar (6″ heavy square hollow bar with air inlet to use down-the-hole hammer), John Deere 4045H diesel deck engine, 40,600# torque, Kelly controlled by hydraulic cylinder, 15,000# crowd 125hp kohler engine force, 11,000# hoist force, 12,000# Pullmaster M12 service winch, mounted on 2008 KenworthT800 truck with Cat C13 (430 hp) diesel engine, approx. 2000 125hp kohler engine hours, 26. 3 hrs) Engine Maintenance History White Gelcoat Hull Cockpit Bimini (Navy) Cockpit Seating (Navy) Alarm, Low and High Water Battery Charger Bilge Pump, Electric (2) Cabin Heater (Off-Engine) Fuel Tank Upgrade (24 Gallons) Nav Pkg (GPS, Depth Sounder, Plotter) Portable Toilet Rod Holders (2) Swim 125hp kohler engine Platform (Removable) VHF Price Includes: Used Aluminum Single-Axle Trailer with Hydraulic Brakes (ROAD KING) Check out this about 3 friends, each Genuine John Deere Oem Spindle in his own Classic R21 Ranger Tug, on a 2-month dream cruise to Alaska along the Inside Passage. 600 125hp kohler engine mm, Width retracted track 2. 5 Achilles Inflatable with oars, wooden floor, 125hp kohler engine (4) life jackets, 4HP outboard with bracket and gas can and Winter Storage at Winter Island Yacht Yard (9 15 18 through 6 30 2019 2007 C-Ranger R25 (Classic) w Trailer $79,900 Please call to confirm current pricing Comes equipped with the following options: YANMAR Diesel 125HP (52. 2000 hours, ideal for drilling inside buildings and limited access locations, clamp and breaker system, RDS 550 rotary head and shock sub, 180 degree side to side mast 125hp kohler engine rotation, 75 hp electric motor, track mounted. PU LIMITED ACCESS MINI RIG (Ref#11437Ta) Year 1999, dual speed tophead, self contained rig with 78 kw engine on board, 3200 hours on 125hp kohler engine clock, ideal for drilling inside of building or low clearance situations Price: $49,500 GEOWELLTECH 3050R CRAWLER DRILL (Ref#14089R) Manufactured 2009, (Geowelltech recently bought out by Atlas Copco), injection pump, crawler rubber tracks, 360 rotation, DTH hammer applications, winch, step up for symmetrix system, Detuz engine, Atlas Copco drilling components, hydraulic pipe rack. 5 125hp kohler engine ton counterweight, 6. Williams 125hp kohler engine Inc. 5 max drill depth, 1m max diameter, located Mexico Price: 610,000 Euros SOILMEC CM70 CFA DRILL RIG (Ref#775N130) Built 2000, completely reconditioned and rebuilt from top to bottom with no expense spared, Cummins 8. 7L diesel engine (240 hp), 30,900# capacity, 17,600# winch, 22,000# winch hammer, rear hyd stabilizer Price: $775,000 125hp kohler engine CDN JUNTTAN PM20L (Ref#10967Tb) Manufactured 2008, crawler mounted, 9545 hours, Cummins QSB 6. , 125hp kohler engine Width extended track 3. Ten degrees 125hp kohler engine of chain feeder tilt, forward, backward and sideways. 9′), 125hp kohler engine 2600mm (8. 25″ square inner bar), John Deere 4045 diesel deck engine, Funk transmission, 90,000# torque, mounted on 2005 Western Star with Cat C15, Eaton 18 speed, tandem steer, tridrive, unit requires line boring 6 John Deere work on trunion Price: $215,000 WATSON 2500 (Ref#10203Re) Manufactured 2003, 90′ drill depth, John Deere 6068 deck engine (recently had a compression test), all new hydraulics in the drill 2014, mounted on 2003 Peterbilt 125hp kohler engine 357 truck, Cat C15 engine, Fuller 18 speed transmission Price: $285,000 WATSON 2500 (Ref#11918T) Manufactured 2003, diesel deck engine, mounted on Peterbilt with diesel engine PRICE REDUCED: $350,000 WATSON 2500 DRILL RIG (Ref#8790R) Manufactured 2003, track mounted, 90′ drill depth (8″ outer, 5″middle, 4-1 4″ Genuine John Deere Oem Gear solid inner), Cummins 8. 8m diameter, 130mm sq Kelly stub, Detuz BF68L413 diesel engine (125 kw) Price: $140,000 BAUER BG-11 (Ref#2498Tc) Year 1987, BK11 125hp kohler engine 292 3 30 kelly bar, 30m drill depth, 1. No derrick, no right angle drive, no final drive 25 X 130 Soccer Hockey Baseball Softball and missing various other parts Price: $225,000 WATSON 2500 (Ref#8666Rb) Manufactured 2004, 120′ 125hp kohler engine drill depth (8″ outer, 6″ floater, 4. 10′ 125hp kohler engine height), approx. In April 2018 installed 125hp kohler engine new winch cables, repacked cylinders, installed new barrel on the Kelly bar and has rig running in good condition. 1 L06 4V Tier 4 engine (emmissions were bypassed), 125hp kohler engine only 750 hours, UDOR 202 water pump, winch, wired tramming remote, approx. 8m diameter, 200m sq 125hp kohler engine Kelly stub, Deutz BF68L413 diesel engine (125 kw) Price: $130,000 BAUER BG-11 (Ref#2498Tb) Year 1985, BK11 292 3 21 kelly bar, 21m drill depth, 1. 7 diesel deck engine, 150′ 4-section Kelly bar Price: $295,000 SOILMEC SR30 (Ref#15472R) Manufactured 2012, approx 4000 hours, track mounted, Cummins QSB 6. 700 mm, Max extraction force 2. Price: 68,000 EUR TERRA DRILL 540 (ref#2244N) Manufactured 1998, mounted on Freightliner, Cat 3406E, Allison automatic 125hp kohler engine transmission, Cumins 5. 5 kN, Feed 125hp kohler engine stroke 12.

7L diesel engine 125hp kohler engine (240 hp), leader with 30,900# capacity, 66′ max pile length, 17,600# winch, 22,000# hammer winch, John Deere 2305 Compact Tractor located Canada Price: $720,000 CDN JUNTTAN PM23LC (Ref#10967Tc) Manufactured 2008, crawler mounted, 6975 hours, Cummins QSB 6. 2500 hours, 3 meter stroke Price: $180,000 USD SOILMEC SM14 125hp kohler engine MICROPILE RIG (Ref#775N131) Year 2008, approx. Jet grouting kit consists of (2) 5m mast extensions, 114mm rods chuck, hydraulic and electric settings, 3 rod carousel for 3m drill rods Price: 100,000 Euros CASAGRANDE C7 (Ref#6953Ta) Manufactured 2008, Deutz engine, 5776 hours, T2500 rotary head, 33′ stroke, 300 X 12 Golf Batting Cage located Canada Price: $230,000 USD CASAGRANDE C7 (Ref#7020Tb) Year 2008, only 2500 hours, 12,165mm (40′) mast, 10,400mm (34′) stroke, T2500 rotary head (20 kn torque), Detuz TLD 2012 LO6 2V (147 kw 200 hp) Deutz diesel engine, radio remote control, M5 clamps (406mm 16″), A2 Service winch (20 kn line pull), NG 550L screw water pump Price: $145,000 CASAGRANDE C7 MICROPILE RIG (Ref#14432Td) Manufactured 125hp kohler engine 1994, 10m stroke, Deutz BF6L 913 diesel engine (146 hp 2500 rpm), T1600 rotary head with 17. 4000 hours, kelly bar rebuilt 2013 Price: $750,000 IMT AF-200 (Ref#15121T) Manufactured 2006, 250 125hp kohler engine knm torque, max dia 1. 5m friction kelly bar Price: 250,000 Euros CASAGRANDE B125 DIAPHRAGM WALL RIG (Ref#775N94) Manufactured 2005, configured with KRC1 attachment Price: 200,000 (Euros) CASAGRANDE B125 (Ref#775N129) Year 2002, 4 x 10m interlock kelly bar Price: 195,000 Euros CASAGRANDE B105NG 125hp kohler engine (Ref#12478R) Manufactured 2008, pprox. 2 kNm 11200# torque, M4-M45 double clamps (76-361mm) with casing extractor on upper 125hp kohler engine clamp, A2 service winch with cathead, 20L oiler, C35 triplex pump, screw pump, safety cage, remote control, everything tested and repaired prior to delivery Price: 165,000 Euros CASAGRANDE C6 (Ref#529T) Year 2003, Deutz BF4M 1013 (93kw 125hp) diesel engine, 6000mm (19. 5′) height with mast up, 2 leveling jacks, drill width 900mm (3′), ideal for low clearance as indoor jobs Price: 65,000 Euros MYM C5 MICROPILE RIG (Ref#15299Ta) Manufactured 2007, double clamps, hose 125hp kohler engine bundle, separate Deutz BF4M2012 track mounted power pack, less than 1000 hours, for limited accesss and low clearance jobs Price: $105,000 NCB BRUNELLO FD1000 MICROPILE RIG (Ref#775N92) 1000 kgm torque, complete with 2 masts Price: 35,000 Euros NOVAMAC GEO-MAX – none available at this time PDI 5020 (Ref#6058R) mounted on 1996 International 4900, auger Starter John Deere 4055 4255 4455 4555 has 2041 hours Price: $100,000 PACCHOISI none available at this time PSM 980 MICROPILE (Ref#775N119) Manufactured 2006, only 1700 hours, Deutz BF4M engine, 980 daNm rotary head torque, 250mm double clamps, Transmission Oil Pump pprox. Very versatile unit that can drill up down and even back under (for example, if a shoring wall needs tiebacks at the edge of roadway and there 125hp kohler engine is no access to position a drill on a steep bank. 10m 33′ drill depth, 500mm 14″ diameter Price: $115,000 TECOP EF5 (Ref#11744T) Year 2017, 6 section 26m Kelly bar, Cat diesel engine, track mounted, located Mexico Price: $325,000 TEXOMA TAURUS XL (Ref#5130Rg) Manufactured 1988, 80′ depth, double kelly bar with 10″ outer bar, mounted on TOR-1616 carrier, 80,000# overall weight, video demo available on request, price includes delivery to Laredo, Texas border Price: $135,000 TEXOMA 900T (Ref#5130Rf) Manufactured 1992, 80′ drill depth, double kelly with 8″ outer bar, mounted on Hendrickson carrier, Detroit 6V53 diesel engine, video demo available on 125hp kohler engine request, price includes delivery to Laredo, Texas border Price: $115,000 TEXOMA 900 (Ref#14429T) Manufactured 1987, 2 stage kelly bar, 100′ drill depth, Cummins diesel deck engine, mounted on Hendrickson 850 DOH Q8x4 carrier with GM 6L-71N diesel engine, only 600 hours on drill and 2,000 miles on carrier. 2017 Ranger Tugs R23 w Trailer $125,500 Please call to confirm current pricing Comes equipped with the following 125hp kohler engine options: 200HP Yamaha Outboard (15.

25″ stub, 6″ 125hp kohler engine outer bar, 6 BTA 5. Price: $40,000 TEXOMA 254 (Ref#6416N) unmounted, Ford gas industrial deck engine, 10′ drill depth, 2-1 4″ kelly bar Price: $29,500 TEXOMA 254 (Ref#4326RC) mounted on International Price on request 254-9 TOPHEAD AUGER DRILL (Ref#9072R) Manufactured 1979, skid mounted, 153 hours, all hydraulic, 9′ stroke, Model 254-9, horizontal and vertical, 9′ x 24″, 9′ kelly, 18,000 20,000 ft lb torque, Ford 6 cylinder Industrial gas motor Price: $15,000 WATSON 3110 (Ref#2133T) Manufactured 2012, 120′ drill depth, 3 section Kelly bar (10″, 8″, 6″) with 4-1 4″ stub, John Deere 6068 HF 485 diesel engine, very low hours, mounted on 2012 Western Star 125hp kohler engine tri drive truck Price: $675,000 USD WATSON 3000 (Ref#14484T) John Deere Oem Re50736 Motor Starter Year 1986, Cummins 5. Shipping 125hp kohler engine weight 8,300 lbs. 4500 hours, Deutz 125hp kohler engine BF4M1013C diesel engine, T1000 6V rotary head (11. To target speed, 3,000 psi winch rated 125hp kohler engine pressure, 14,000 lbs crowd and retract, 50 gmp winch rated flow, pprox. 500 mm, Width shoes 600 mm, Rotary head torque 3. 80,000 GVW, 36,000 front, 44,000 125hp kohler engine rears, stored inside, also comes with augers and buckets. Good for work in restricted areas. Chain feeder has a stinger mounting 125hp kohler engine that permits vertical movement of the feeder. 3 diesel deck engine, Allison transmission, 90,000# torque, mounted on 2001 Western Star with Cat C15, Eaton 18 speed, tandem steer tridrive unit, requires final drive Price: $145,000 WATSON 2000 (Ref#9065RB) Manufactured 1980, 60′ kelly bar, track mounted, Detroit diesel deck engine, 58,000# overall weight, 10′ wide, approx. It is mounted on a versatile crawler track platform with high ground clearance. 6000 hours, Cummins 125hp kohler engine QSB 5. 5000 hours (as of Jan 2015), BT280-2 419 rotary, 125hp kohler engine heavy duty 419 kelly bar for 27m depth, kelly guide, mast foot, mounted on Sennebogen SR48BT carrier with 350 hp engine Price: $1,300,000 DELMAG RH26 (Ref#3244Nc) Manufactured 2007, pprox. 31,000# overall weight PRICE John Deere Mc Final REDUCED: $165,000 HUTTE 504FTW 125hp kohler engine (Ref#4602T) Manufactured 2012, Tier 4i, 214 hp, remote, 16 ton, double rotary 19,000 ft lbs, 12″ clamps, gamma pump, oiler, 2400 hours (as of March 2018) Price: $224,500 HUTTE HBR-504 (Ref#7891R) Manufactured 2004, approx. 9L diesel deck engine, 105,000# torque, mounted on fixed track base (12′ width), 78,000# overall weight, 8″ square Kelly bar with 5-1 4″ square stub, 70′ drill depth, auger size 18″ 144″ diameter, 12 ton 24,000# main winch, 8 ton 16,000# service winch, 60′ overall height Price: $140,000 WATSON 3000 (Ref#2700R) 125hp kohler engine Manufactured 1970’s, mounted on 4 axle Crane Carrier 60′ drill depth PPRICE REDUCED: $75,000 WATSON 2500TM (Ref#15139T) Manufactured 2012, John Deere 4045 HF 485 (173 hp) deck engine, M25 (25,000#) winch, operator’s cab in rear, 130′ drill depth, triple kelly bar (6″, 5″, 4″), mounted on 2012 Western Star 4900SA tridrive with sleeper cab, pre heat, Detroit DD15 diesel engine (560 hp) with Eaton Fuller RTL0-189188 transmission Price: $450,000 WATSON 2500 (Ref#8666Ra) Parts rig Manufactured 2005, mounted on 2006 Western Star with Cat C15, Eaton Fuller 18 speed, tri drive tandem steer. 440 Louisiana Street Suite 590 Houston, TX 77002 COMPANY INFO Charities 125hp kohler engine Services Contact Us P: F: E: 2017 SALVEX Incorporated Office Hours: 9:00am – 5:00pmYard Hours: 7:30am – 4:00pm Phone: Email: RANGER TUGS The boats listed here are previously-owned Ranger Tugs.

23′ overall height (can be shorter by removing middle section) Price: $200,000 MUSTANG A65 MICROPILE RIG (Ref#775N86), year 1989, less 5,000 hours, Diesel engine SAME 1055P (power 66Kw), Pull force 9t, Clamps 220mm PRICE: 45,000EUR ATLAS COPCO MUSTANG 4N2 MINI RIG (Ref#14095T) Manufactured 2004, only 120 original hours, mounted on rubber tracks and powered by separate wheeled power pack with Deutz BF4L 914 Turbo diesel engine, 250mm double clamps, 1800mm stroke (5. 8m, comes with 2 kelly bars: 36m (4 x 9m) and 48m (4 x 12), located Central America Price: $285,000 IMT AF-180D (Ref#1656R) Manufactured 2006, crawler mounted with Cat engine Price: $560,000 IMT AF-180C (Ref#1657R) Manufactured 2004, crawler mounted with Cat engine REDUCED: 125hp kohler engine $405,000 IMT 180C (Ref#10248Ta) Manufactured Genuine John Deere Oem Muffler 2003, Cat C9 diesel engine, mounted on Cat 330C base, 4 x 13. 5900 hours, 4 x 9m interlocking Kelly bar Price: $330,000 USD SOILMEC 312-200 (Ref#775N117) Manufactured 2003, Cummins engine (EPA approved for import to USA), new slew ring, 3 x 10m interlocking kelly bar Price: 195,000 (Euros) SOILMEC R210 (Ref#10169Tb) Manufactured 2006, 32m drill depth, 1. 10 danm torque, 125hp kohler engine up to 1. 9 knm torque), 305mm double clamps, A2 winches, 20L oiler Price: 100,000 Euros CMV MK200 MICROPILE RIG (Ref#775N83), year 1988, Diesel engine 125hp kohler engine VM SUN 2105, power 45 hp. BAUER BG-11 (Ref#2498Ta) Year 1984, BK11 292 2 125hp kohler engine 18 kelly Genuine John Deere Oem bar, 18m drill depth, 1. 7m) Price: $95,000 SUMITOMO SD205-2 (Ref#14117Tb) Manufactured 1994, 4 x 12m kelly bar, bucket, located Asia Price: $85,000 TECHNO 410 DRILL RIG 125hp kohler engine (Ref#5645Tb) Manufactured 2009, Cat engine, 4800 hours Price: $115,000 TEI TD75 ELECTRIC HYDRAULIC LIMITED ACCESS ROCK DRILL (Ref#7278R) Manufactured 2014, pprox.

– $27,500 (price includes trailer) – $125,500 (price includes trailer) SOLD – $118,900 – $105,495 (price includes inflatable w O B) – $79,900 (price includes trailer) – $159,495 (includes custom extras) Call or email for information or to schedule a visit to our yard. 9 Cummins deck engine, 3 speed Allison transmission, recently refurbished, mounted on 2005 Freightliner truck with Detroit diesel engine, 18 speed, 6,000# service winch, 12,000# kelly winch, 25,000# crowd, 56,000# torque Price: $165,000 TEXOMA BRONTO ARTIC 35 DRILL RIG (Ref#15451N) mounted on Ford 9000 truck with Cat 3208 diesel engine 5 x 4 transmission, Detroit diesel deck engine, 35′ depth, 4″ wet Kelly, 125hp kohler engine good working condition, new paint PRICE REDUCED: $65,000 TEXOMA 650-40 (Ref#10364T) Manufactured 2006, approx. 5m interlocking Kelly bar, Tier 4 dieel engine Price: 395,000 Euros 125hp kohler engine SOILMEC SR30 (Ref#10035Ta) Manufactured 2014, 4 stage 36m interlocking Kelly bar, Tier 4 diesel engine, located Mexico Price: 375,000 Euros SOILMEC SR30 (Ref#3556Ra) Manufactured 2013, 4 x 11m interlocking kelly bar Price: $345,000 SOILMEC SR30 (Ref#2150T) Manufactured 2012, Tier 4 Cummins QSB 6. Price: 125hp kohler engine $185,000 TEXOMA TEREX 900T (Ref#14529T) Manufactured 2001, track mounted, Cummins C8. 3800 hours, 3500# lift and pulldown, 1500# torque, mounted on tandem axle 24′ gooseneck trailer, 20 hp electric motor to run the hydraulic pumps, 40 kw generator included, all mounted on the trailer Price: $25,000 TEI HCM GEO-DRILL (Ref#6229T) RDS 550 125hp kohler engine rotary drive head, 2-speed rotary, 1000 ft lb, mounting plate for tracked skid steer, (2) hyd leveling jacks, down hole hammer GEOLOOP 50-500 GROUT PUMP (Ref#6229T) 80 gal stainless steel mixing tank, tandem hydraulic driven 5 x 8 piston pump, 2 cylinder Honda gas engine, mounted on 24′ tandem axle trailer, some spare parts Pacakge Price: $97,500 TEREDO DC200 MICROPILING RIG (Ref #775N60) Year 2007, approximately 2,500 hours, 3600mm stroke (use 10′ pipe), 5300mm mast length (18′), 63KN extraction force, 19. 6000 hours, 4 44m kelly bar, BH60 extendable 125hp kohler engine undercarriage, Cummins deck engine PRICE REDUCED: 400,000 (Euros) BAUER BG18 (Ref#1099Ra) Manufactured 2008, pprox. PRICE REDUCED: $140,000 TEI 7D75 ELECTRIC MINI RIG 125hp kohler engine (Ref#15299Tb) Manufactured 2002, track mounted, ideal for drilling inside buildings and limited access jobs, new tracks in 2015, new cord in 2016, new power supply with water tight electrical box in 2016. , 125hp kohler engine Operating weight 2. 300 kg PRICE: MAKE OFFER CMV MK3000F MICROPILE RIG (Ref#775N85), 125hp kohler engine year 2003, Diesel engine DEUTZ BF6M1013, power 141 kW. Welcome to Salvex 125hp kohler engine the leader in asset recovery and global inspections. John Deere Unstyled Us Private compartments 125hp kohler engine allow sleeping accommodations for up to five. , Clamps 125hp kohler engine 60-200 mm. , Rotary head 125hp kohler engine torque 200 kgm. 25″ 125hp kohler engine square inner bar), Cummins 6CT 8. 7′) mast length, 4,000mm (13′) 125hp kohler engine stroke, T1000 6V rotary head (11. Large cabin windows and overhead skylight hatches help brighten the interior and offer a panoramic view all around. 9L Cummins engine Price: $90,000 SPIRADRILL LDH-50 (SHORT MAST) 125hp kohler engine (Ref#1976Tb) Year 2015, 50′ drill depth, 3. 17,500# overall weight, options include Bellin water screw pump, DTH lubricating tank, excellent condition Price: 85,000 Euros REV-DRILL 34HD (Ref#13693Rb) Manufactured 2009, 34′ stroke sled travel, 34-55′ max drill depth, 12-72″ auger diameter range, 4,500 psi motor rated pressure, 125hp kohler engine 10,000 14,000 ft lbs torque, 50 gmp flow req. The inviting galley includes a sink, stove, refrigerator 125hp kohler engine and microwave.

Leave a Comment

Your email address will not be published. Required fields are marked *